Filtri terahertz
Band pass BPF · Band stop BSF · Low pass LPF · High pass HPF
Filtri passa banda, elimina banda, passa basso e passa alto per terahertz. Trasmissione di picco > 70 %, tipicamente > 90 %. Frequenza centrale mantenuta entro < 5 %, personalizzabile fino a < 1 %, e larghezza di banda < 30 %, personalizzabile fino a < 1 %. Dimensioni fino a 150 mm, da 100 Euro per un Tipo I da 10 mm.
Tempi di consegna su richiesta
I prezzi online hanno valore puramente indicativo. I prezzi esatti possono essere fino al 20% superiori a seconda del tasso di cambio corrente — la preghiamo di richiedere un’offerta formale.
Four filter families, all metal mesh: **band pass (BPF)** for isolating one line, **band stop (BSF)** for rejecting one, **low pass (LPF)** for cutting everything above a frequency, and **high pass (HPF)** for cutting everything below it. Peak transmission is above 70 % and typically better than 90 %.
Centre frequency is held to within 5 % as standard and can be specified to better than 1 %; bandwidth is under 30 % as standard and can be narrowed below 1 %. Clear apertures run to 150 mm. Anything outside the standard range is made to order — tell us the frequency, the width and the aperture you need.
Every curve in the figures below is a measurement, not a model. The low-pass data was taken on a Perkin-Elmer FTIR spectrometer with each sample scan ratioed against its own open-beam reference; where a second trace appears above the filter curve, that is the reference.
- ▸ **Low pass, 3 THz type** — measured half-power cut-off **3.0 THz**, passband 87 %, blocking 1.4 % (−18.5 dB) median from 3.6 to 24 THz.
- ▸ **Low pass, 20 THz type** — measured half-power cut-off **21.5 THz**, passband 83 %, blocking 0.5 % median from 23 to 30 THz.
- ▸ Filter designations below are nominal. The measured cut-off of a mesh filter sits a little above the name it is sold under; both numbers are given so there is no ambiguity.
Scegli la specifica — il codice modello e il prezzo compaiono subito.
| Trasmissione di picco | > 70 % Tip. > 90 % |
|---|---|
| Tolleranza sulla frequenza centrale | < 5 % personalizzabile < 1 % |
| Larghezza di banda | < 30 %. Personalizzabile < 1 % |
| Dimensione | up to 150 mm |
| Type I | Passa-banda (BPF) | < 3 THz | 10 mm — 100 Euro · 19 mm — 400 Euro · > 19 mm — ci contatti |
| Type II | Passa-banda (BPF) | 3 – 30 THz | Contatti |
| Type III | Band pass (BPF), high rejection | — | Contatti |
| Type IV | Passa-basso (LPF) | measured examples at 3, 9.5 and 20 THz | Contatti |
| — | Elimina-banda (BSF) | made to order | Contatti |
| — | Passa-alto (HPF) | made to order | Contatti |
I filtri
Passa-basso (LPF)
Passa-banda (BPF)
Rigi Camera
Cristalli organici (emettitori)
Cristalli rivelatori THz
