미국 관세 환급: 2025년 9월 1일부터 Swiss THz는 2025년에 도입된 미국 관세를 전액 부담할 것을 보증합니다. 본 보증은 주문 시점에 요청한 3,000 USD 이상의 신규 유기 결정 또는 분광기 주문에 적용됩니다.
Swiss Terahertz
두께 도구
홈/제품/부품/테라헤르츠 필터
테라헤르츠 필터
필터 적용 범위
0.10.3131030테라헤르츠 필터
최대 150 mm 크기맞춤 제작 시 < 1 %일반 투과율 > 90 %
부품 · BPF, BSF, LPF, HPF

테라헤르츠 필터

Band pass BPF · Band stop BSF · Low pass LPF · High pass HPF

테라헤르츠용 대역 통과, 대역 저지, 저역 통과 및 고역 통과 필터입니다. 최대 투과율 > 70 %, 일반적으로 > 90 %. 중심 주파수는 < 5 %, 맞춤 제작 시 < 1 %로 유지되며 대역폭은 < 30 %, 맞춤 제작 시 < 1 %입니다. 크기는 최대 150 mm, 10 mm Type I 기준 100 유로부터입니다.

최대 투과율일반 > 90 %
중심 공차< 5 %, to < 1 %
대역폭< 30 %, to < 1 %
크기up to 150 mm
100 유로부터
Type I, 10 mm
취리히에서 발송
납기는 요청 시 안내

온라인 가격은 예산 산정 목적으로만 제공됩니다. 실제 가격은 현재 환율에 따라 최대 20% 높을 수 있습니다 — 정식 견적을 요청해 주십시오.

Four filter families, all metal mesh: **band pass (BPF)** for isolating one line, **band stop (BSF)** for rejecting one, **low pass (LPF)** for cutting everything above a frequency, and **high pass (HPF)** for cutting everything below it. Peak transmission is above 70 % and typically better than 90 %.

Centre frequency is held to within 5 % as standard and can be specified to better than 1 %; bandwidth is under 30 % as standard and can be narrowed below 1 %. Clear apertures run to 150 mm. Anything outside the standard range is made to order — tell us the frequency, the width and the aperture you need.

Every curve in the figures below is a measurement, not a model. The low-pass data was taken on a Perkin-Elmer FTIR spectrometer with each sample scan ratioed against its own open-beam reference; where a second trace appears above the filter curve, that is the reference.

  • ▸ **Low pass, 3 THz type** — measured half-power cut-off **3.0 THz**, passband 87 %, blocking 1.4 % (−18.5 dB) median from 3.6 to 24 THz.
  • ▸ **Low pass, 20 THz type** — measured half-power cut-off **21.5 THz**, passband 83 %, blocking 0.5 % median from 23 to 30 THz.
  • ▸ Filter designations below are nominal. The measured cut-off of a mesh filter sits a little above the name it is sold under; both numbers are given so there is no ambiguity.
일반 사양
최대 투과율> 70 % 일반값 > 90 %
중심 주파수 공차< 5 %, 맞춤 제작 시 < 1 %
대역폭< 30 %. 맞춤 제작 시 < 1 %
크기up to 150 mm
유형 및 가격
Type I대역 통과 (BPF)< 3 THz10 mm — 100 유로 · 19 mm — 400 유로 · > 19 mm — 문의
Type II대역 통과 (BPF)3 – 30 THz문의
Type IIIBand pass (BPF), high rejection—문의
Type IV저역 통과 (LPF)measured examples at 3, 9.5 and 20 THz문의
—대역 저지 (BSF)made to order문의
—고역 통과 (HPF)made to order문의

문서 및 그림

필터

Terahertz metal-mesh filters
Terahertz metal-mesh filters
Mounted terahertz filter
Mounted terahertz filter

저역 통과 (LPF)

Low pass, 3 THz type — measured cut-off 3.0 THz, Perkin-Elmer FTIR
Low pass, 3 THz type — measured cut-off 3.0 THz, Perkin-Elmer FTIR
Low pass, 9.5 THz cut-off (upper trace is the open-beam reference)
Low pass, 9.5 THz cut-off (upper trace is the open-beam reference)
Low pass, 20 THz type — measured cut-off 21.5 THz, Perkin-Elmer FTIR
Low pass, 20 THz type — measured cut-off 21.5 THz, Perkin-Elmer FTIR

대역 통과 (BPF)

Band pass, 0.3 THz centre
Band pass, 0.3 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre, clean baseline
Band pass, 0.5 THz centre, clean baseline
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre, logarithmic — rejection better than −40 dB
Band pass, 0.5 THz centre, logarithmic — rejection better than −40 dB
Band pass, 8.3 THz centre
Band pass, 8.3 THz centre
Band pass, 8.5 THz centre
Band pass, 8.5 THz centre
Band pass, 9.2 THz centre, with a side lobe near 16.5 THz
Band pass, 9.2 THz centre, with a side lobe near 16.5 THz
Band pass, 12.5 THz centre
Band pass, 12.5 THz centre
Band pass, 16 THz centre
Band pass, 16 THz centre
Band pass, 17 THz centre
Band pass, 17 THz centre

응용 분야

More in 부품