米国関税の返金: 2025年9月1日より、Swiss THz は2025年に導入される米国関税を当社が負担することを保証します。本保証は、3,000 USD を超える有機結晶または分光器の新規ご注文について、ご注文時にお申し出いただいた場合に適用されます。
Swiss Terahertz
膜厚ツール
ホーム/製品/コンポーネント/テラヘルツフィルタ
テラヘルツフィルタ
フィルタ対応範囲
0.10.3131030テラヘルツフィルタ
サイズ最大 150 mm< 1 % までカスタマイズ可能透過率 標準 > 90 %
コンポーネント · BPF, BSF, LPF, HPF

テラヘルツフィルタ

Band pass BPF · Band stop BSF · Low pass LPF · High pass HPF

テラヘルツ用のバンドパス、バンドストップ、ローパス、ハイパスフィルタ。ピーク透過率 > 70 %、標準 > 90 %。中心周波数は < 5 %、< 1 % までカスタマイズ可能、帯域幅は < 30 %、< 1 % までカスタマイズ可能です。サイズは最大 150 mm。

ピーク透過率標準 > 90 %
中心公差< 5 %, to < 1 %
帯域幅< 30 %, to < 1 %
サイズup to 150 mm
お問い合わせ
Type I、10 mm
チューリッヒより出荷
納期はお問い合わせください

日本国内の価格は正式なお見積りにてご案内いたします。仕様をお知らせのうえ、お問い合わせください。

Four filter families, all metal mesh: **band pass (BPF)** for isolating one line, **band stop (BSF)** for rejecting one, **low pass (LPF)** for cutting everything above a frequency, and **high pass (HPF)** for cutting everything below it. Peak transmission is above 70 % and typically better than 90 %.

Centre frequency is held to within 5 % as standard and can be specified to better than 1 %; bandwidth is under 30 % as standard and can be narrowed below 1 %. Clear apertures run to 150 mm. Anything outside the standard range is made to order — tell us the frequency, the width and the aperture you need.

Every curve in the figures below is a measurement, not a model. The low-pass data was taken on a Perkin-Elmer FTIR spectrometer with each sample scan ratioed against its own open-beam reference; where a second trace appears above the filter curve, that is the reference.

  • ▸ **Low pass, 3 THz type** — measured half-power cut-off **3.0 THz**, passband 87 %, blocking 1.4 % (−18.5 dB) median from 3.6 to 24 THz.
  • ▸ **Low pass, 20 THz type** — measured half-power cut-off **21.5 THz**, passband 83 %, blocking 0.5 % median from 23 to 30 THz.
  • ▸ Filter designations below are nominal. The measured cut-off of a mesh filter sits a little above the name it is sold under; both numbers are given so there is no ambiguity.
一般仕様
ピーク透過率> 70 % 標準 > 90 %
中心周波数の公差< 5 %、< 1 % までカスタマイズ可能
帯域幅< 30 %。< 1 % までカスタマイズ可能
サイズup to 150 mm
タイプと価格
Type Iバンドパス (BPF)< 3 THzお問い合わせ
Type IIバンドパス (BPF)3 – 30 THzお問い合わせ
Type IIIBand pass (BPF), high rejection—お問い合わせ
Type IVローパス (LPF)measured examples at 3, 9.5 and 20 THzお問い合わせ
—バンドストップ (BSF)made to orderお問い合わせ
—ハイパス (HPF)made to orderお問い合わせ

資料と図

フィルター

Terahertz metal-mesh filters
Terahertz metal-mesh filters
Mounted terahertz filter
Mounted terahertz filter

ローパス (LPF)

Low pass, 3 THz type — measured cut-off 3.0 THz, Perkin-Elmer FTIR
Low pass, 3 THz type — measured cut-off 3.0 THz, Perkin-Elmer FTIR
Low pass, 9.5 THz cut-off (upper trace is the open-beam reference)
Low pass, 9.5 THz cut-off (upper trace is the open-beam reference)
Low pass, 20 THz type — measured cut-off 21.5 THz, Perkin-Elmer FTIR
Low pass, 20 THz type — measured cut-off 21.5 THz, Perkin-Elmer FTIR

バンドパス (BPF)

Band pass, 0.3 THz centre
Band pass, 0.3 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre, clean baseline
Band pass, 0.5 THz centre, clean baseline
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre
Band pass, 0.5 THz centre, logarithmic — rejection better than −40 dB
Band pass, 0.5 THz centre, logarithmic — rejection better than −40 dB
Band pass, 8.3 THz centre
Band pass, 8.3 THz centre
Band pass, 8.5 THz centre
Band pass, 8.5 THz centre
Band pass, 9.2 THz centre, with a side lobe near 16.5 THz
Band pass, 9.2 THz centre, with a side lobe near 16.5 THz
Band pass, 12.5 THz centre
Band pass, 12.5 THz centre
Band pass, 16 THz centre
Band pass, 16 THz centre
Band pass, 17 THz centre
Band pass, 17 THz centre

アプリケーション

More in コンポーネント